What You Must Know Regarding the Log Home Builder Kits
The first decision which you have to make when you think about using the log home builder kits for building that log home is the method of its construction. You can choose the saddle notch method or you may go for the butt-and-pass method. Every style would refer to the way in which the home is joined at its corners.
You must know that such saddle notch method would require the builders to cut a notch in the log that fits a perpendicular log that will be placed on top of this. Logs are then stacked in a fashion to build a wall and the weight of the logs are going to make the lock lightly and create such secure corners. There are some builders which drive a bolt or stake through the logs in order to add security.
Through the butt-and-pass method, such perpendicular log is butted against the existing log when the stacking of the log is started. At the second level of stacking, the log is going to pass over the first perpendicular log. On the third level, the log is going to butt up against such perpendicular log. This stacking would continue until the wall is finished.
How I Became An Expert on Houses
You must know that the butt-and-pass method is utilized with the log home kits but such would create spacing between the logs that have to be filled with insulation as well as chinking and this is one method that equates to caulking the log home. The logs are secured with stakes and bolts driven down from one log to the next.
5 Key Takeaways on the Road to Dominating Services
Naturally, such saddle notch method would tend to be costlier for the builders as well as the homebuyers. One of the reasons for such is because of such amount of precision to align the logs properly. This would take careful measuring so that the logs will be cut at the right inch specifications so that the perpendicular log can fit into the groove and make such tight corner.
Even if a few companies out there are do claim to use the butt-and-pass method for the log home kits, there are also critics that have contended this type of method isn’t possible through the use of the kit. The kits are often manufactured somewhere else and they are shipped for assembly on the property. Some builders do claim that the butt-and-pass method is strong and this cannot be shipped in parts and also be reassembled.
A challenge which many homeowners purchasing the log home builder kits face is the settling which happens after assembly. This is actually a kind of natural process that forces some parts of the home to fall out its alignment after a year or after the logs have completely dried up.